SAS4A/SASSYS-1
ANL/NSE-SAS/5.7 (7132)

Contents

  • Part I: Using SAS4A/SASSYS‑1
  • Part II: Whole-Plant Analysis
  • Part III: Fuel Performance
    • 8. DEFORM-4: Steady-State and Transient Pre-Failure Pin Behavior
    • 9. MFUEL: Metallic Fuel Performance Model
      • 9.1. Introduction
      • 9.2. Model Formulation
      • 9.3. Time Step Controls
      • 9.4. Solution Algorithm and Flow Charts
      • 9.5. Interactions with Other SAS Models
      • 9.6. Input and Output Description
      • 9.7. References
      • 9.8. Appendices
        • 9.8.1. Appendix 9.1: Main Assumptions
        • 9.8.2. Appendix 9.2: Thermodynamics and Kinetics Parameters of Fuel Constituent Redistribution Model
        • 9.8.3. Appendix 9.3: Thermodynamics and Kinetics Parameters of Fuel Clad Chemical Interaction Model
        • 9.8.4. Appendix 9.4: Fuel Swelling and Fission Gas Release Model Parameters
        • 9.8.5. Appendix 9.5: Mechanical Properties
        • 9.8.6. Appendix 9.6: Metallic Fuel Thermal Conductivity Model
        • 9.8.7. Appendix 9.7: MCF Model Parameters
        • 9.8.8. Appendix 9.8: DEFORM-5: Metallic Fuel Cladding Transient Behavior Model
    • 10. SSCOMP: Pre-Transient Characterization of Metallic Fuel Pins
    • 11. FPIN2: Pre-Failure Metal Fuel Pin Behavior Model
  • Part IV: Failure Modeling

Information

  • About Argonne
  • Disclaimer
  • License
SAS4A/SASSYS-1
  • »
  • Part III: Fuel Performance »
  • 9. MFUEL: Metallic Fuel Performance Model »
  • 9.8. Appendices
  • View page source

9.8. Appendices¶

  • 9.8.1. Appendix 9.1: Main Assumptions
  • 9.8.2. Appendix 9.2: Thermodynamics and Kinetics Parameters of Fuel Constituent Redistribution Model
  • 9.8.3. Appendix 9.3: Thermodynamics and Kinetics Parameters of Fuel Clad Chemical Interaction Model
  • 9.8.4. Appendix 9.4: Fuel Swelling and Fission Gas Release Model Parameters
  • 9.8.5. Appendix 9.5: Mechanical Properties
  • 9.8.6. Appendix 9.6: Metallic Fuel Thermal Conductivity Model
  • 9.8.7. Appendix 9.7: MCF Model Parameters
  • 9.8.8. Appendix 9.8: DEFORM-5: Metallic Fuel Cladding Transient Behavior Model
    • 9.8.8.1. Introduction
    • 9.8.8.2. Model Formulation
    • 9.8.8.3. Solution Techniques and Code Implementation
    • 9.8.8.4. References
    • 9.8.8.5. Nomenclature
Next Previous

© Copyright UChicago Argonne, LLC - ALL RIGHTS RESERVED.

Built with Sphinx using a theme provided by Read the Docs.