SAS4A/SASSYS-1
ANL/NSE-SAS/5.4.2 (5308)

Contents

  • Part I: Using SAS4A/SASSYS‑1
  • Part II: Whole-Plant Analysis
  • Part III: Fuel Performance
    • 8. DEFORM-4: Steady-State and Transient Pre-Failure Pin Behavior
    • 9. DEFORM-5: Metallic Fuel Cladding Transient Behavior Model
      • 9.1. Introduction
      • 9.2. Model Formulation
      • 9.3. Solution Techniques and Code Implementation
      • 9.4. References
      • 9.5. Nomenclature
    • 10. SSCOMP: Pre-Transient Characterization of Metallic Fuel Pins
    • 11. FPIN2: Pre-Failure Metal Fuel Pin Behavior Model
  • Part IV: Failure Modeling

Information

  • About Argonne
  • Disclaimer
  • License
SAS4A/SASSYS-1
  • »
  • Part III: Fuel Performance »
  • 9. DEFORM-5: Metallic Fuel Cladding Transient Behavior Model
  • View page source

9. DEFORM-5: Metallic Fuel Cladding Transient Behavior Model¶

  • 9.1. Introduction
  • 9.2. Model Formulation
    • 9.2.1. Fission Gas
    • 9.2.2. Fuel/Cladding Eutectic Alloy Formation
    • 9.2.3. Clad Strain
    • 9.2.4. Cladding Failure
  • 9.3. Solution Techniques and Code Implementation
    • 9.3.1. Initialization
    • 9.3.2. Fuel/Cladding Eutectic Alloy Formation
    • 9.3.3. Fission Gas
    • 9.3.4. Cladding Strain
    • 9.3.5. Cladding Failure
    • 9.3.6. Printed Output
  • 9.4. References
  • 9.5. Nomenclature
Next Previous

© Copyright Argonne National Laboratory.

Built with Sphinx using a theme provided by Read the Docs.