SAS4A/SASSYS-1
ANL/NSE-SAS/5.7.2 (7807)
Contents
Part I: Using SAS4A/SASSYS‑1
Part II: Whole-Plant Analysis
Part III: Fuel Performance
8. DEFORM-4: Steady-State and Transient Pre-Failure Pin Behavior
9. MFUEL: Metallic Fuel Performance Model
10. SSCOMP: Pre-Transient Characterization of Metallic Fuel Pins
10.1. Introduction and Overview
10.2. The Earlier SSCOMP Model and Current Capability
10.3. Thermal Properties of U-Pu-Zr and U-Zr Alloy Fuels as a Function of Composition
10.4. Future Directions for Modeling Efforts
10.5. References
10.6. Nomenclature
10.7. Appendices
11. FPIN2: Pre-Failure Metal Fuel Pin Behavior Model
Part IV: Failure Modeling
Information
About Argonne
Disclaimer
License
SAS4A/SASSYS-1
Part III: Fuel Performance
10.
SSCOMP: Pre-Transient Characterization of Metallic Fuel Pins
View page source
10.
SSCOMP: Pre-Transient Characterization of Metallic Fuel Pins
10.1. Introduction and Overview
10.2. The Earlier SSCOMP Model and Current Capability
10.3. Thermal Properties of U-Pu-Zr and U-Zr Alloy Fuels as a Function of Composition
10.3.1. Temperature-Dependent Tables
10.3.2. Regionwise Interpolation of IFR Handbook Data
10.3.3. Correlations of the Report ANL/RAS 85-19
10.3.4. Properties of Some Specific Fuels
10.3.5. Computer Implementation
10.4. Future Directions for Modeling Efforts
10.4.1. Fuel constituent Radial Migration
10.4.2. Fission Gas Behavior, and Porosity Formation and Distribution
10.4.3. Irradiation-Induced Radial and Axial Swelling of Fuel and Cladding
10.5. References
10.6. Nomenclature
10.7. Appendices
10.7.1. APPENDIX 10.1: Equivalency of Interpolation in Terms of Weight Fractions and Atom Fractions
10.7.2. APPENDIX 10.2: Correlations in the IFR Handbook and Some Other Sources